Search This Blog

automatic_trash_bin

Main Page

Get link
Facebook
X
Pinterest
Email
Other Apps

Content:
1. Introduction to Automatic trash bin
2. FIRST STAGE: week one
3. SECOND STAGE: week two
4. THIRD STAGE: week three
5. FOURTH STAGE: week four
6. FINAL STAGE: week five
7. Survey conducted and the code used

Get link
Facebook
X
Pinterest
Email
Other Apps

Comments

Introduction to Automatic trash bin

The Automatic Trash Bin Year Two Group Project, University of Liverpool, Electrical and Electronics Engineering Department. The developments of this project were supervised by Dr. James Bradley The Group members are Haoran Cheng, Xuhui Gong, Shekhah Mobarak, A-ro Han The main aim of this project is to construct an operational automatic trash bin that is able to distinguish between different types of trash and dispose of them into their assigned category, this project was chosen to ease the operation of recycling considering that recycling has a great positive impact to preserving the environment. This blog will contain the weekly updates of this products development, the blog will contain brief explanations and illustrations of each development stage. Introduction to the Automatic Sorting Trash Bin There has been a rapid increase to the concern of the environment, consequently many countries h...

Survey conducted and the code used

The Automatic Trash Bin Year Two Group Project, University of Liverpool, Electrical and Electronics Engineering Department. The developments of this project were supervised by Dr. James Bradley The Group members are Haoran Cheng, Xuhui Gong, Shekhah Mobarak, A-ro Han In this section of the blog you will find the survey that was conducted by the group along with the code used for the entire project. The questions of the survey are written below; 1. Do you think that recycling helps preserve the environment? - Yes - No - If you chose no, please explain why? 2. Do you tend to recycle often? - Yes - Sometimes - No - ...

SECOND STAGE: week two

The Automatic Trash Bin Year Two Group Project, University of Liverpool, Electrical and Electronics Engineering Department. The developments of this project were supervised by Dr. James Bradley The Group members are Haoran Cheng, Xuhui Gong, Shekhah Mobarak, A-ro Han WEEK TWO; 7 February 2020 Second Stage The second week started with the weekly meeting held by the group members where the developments of the previous week have been discussed. Main goals were set for the week which were; to research what type of material is preferable for the design set by the group, please find figure 11 on week ones’ tab for the design in addition the group members were contemplating about a methodology of connecting the hardware and software together. Following the brief meeting held by the group members the group met with the supervisor to discuss the project previous week progress (week one), additionally the group is to discuss what were the complications that t...